Long shaft chopper pumps for fish industry

Landia’s stainless long-shafted MPFR-I pump can handle fish up to 22.05 lbs without pre-grinding and is ideal for use in silage. It can handle the entire silage process with the same pump. 
With its efficiency and low operating costs, the MPFR-I pump is a simple and powerful solution for handling dead fish at fish farms.

Let us find a solution together

Use of the long shaft chopper pump

The Landia MPFR-I pump is a long-shafted chopper pump made of stainless steel. The suction is at the top of the pump, and one or more so-called shredders are mounted on the shaft. Their function is to “coarsely chop” the contents of the tank and to force the media into the pump. Here, a knife system ensures the final chopping.
 
The MPFR-I pump is ideal for the production of fish silage. The pump has a high flow, which ensures that the media repeatedly passes through the pump. This means that the chopping is optimal with high-quality silage as a result.
 
MPFR-I is a reliable pump that requires minimal maintenance. The pump does not have seals, an oil chamber or anything else requiring service.

MPFR-I can be configured in a myriad of ways to suit the specific task. The pump has proven its worth in silage since 1990 and has been optimized over the years.

Case study about long shaft chopper pumps

Our models

The sensible choice for your system

  • checkReliable equipment with a proven long lifetime of use gives you time to focus on other important things during the workday.
  • checkA safe investment – spare parts and service are always available directly from our US subsidiary located in North Carolina.
  • checkPersonal service guaranteed. We say what we do, and we do what we say.

Read more about what we stand for

Our solutions within the fish industry

Case studies - fish industry

Fish industry

Silaging on a factory trawler from the faroe islands

Equipped with this new system, the trawler will be able to produce large amounts of fish silage.

Read the case study

Fish industry

New Faroe Islands factory trawler

Landia has supplied chopper pumps and a mixer for a new, integrated Faroe Islands factory trawler.

Read the case study

Fish industry

Silage Plant at Atlantic Sapphire

In the summer of 2019 Landia has supplied a silage plant for the silage of by-products from slaughterhouses as well as fish that die before the slaughter at Atlantic Sapphire commercial onshore pilot plant for Atlantic Salmon farming in Hvide Sande.

Read the case study

Fish industry

Anaerobic Digestion Of Aquaculture Organics

Scottish waste authority recently installed a pasteurization system to enable it to accept salmon waste - and meet the UK’s Animal By-Product regulations.

Read the case study

Fish industry

BioChop provides increased fish silage biosecurity in Faroe Islands

Landia BioChop provides increased fish silage biosecurity in Faroe Islands. Following a series of successful installations, Landia is providing its fourth BioChop unit to Faroe Islands-based P/F Luna.

Read the case study

IndustrialFish industry

Silaging salmon from the faroe islands

Landia silage tank ensures efficient shredding and circulation.

Read the case study

Fish industry

Recycling Food Waste from Fish Morts Using Anaerobic Digestion

There are many sources of waste food, and ways to recycle food waste, but one of the most unusual must be to recycle fish morts by anaerobic digestion.

Read the case study

Fish industry

Demand for fish ensiling as by-product value increases

With local technical back-up at hand, the aquaculture industry is now more focused than ever before on biosecurity and the increasing value of by-products.

Read the case study

Fish industry

Salmon waste success with new pasteuriser

The Isle of Lewis has seen salmon waste success with the development of a new pasteuriser by Landia.

Read the case study

Fish industry

Pump up the grid

Scottish farm's pasteurization process powers national grid.

Read the case study

A strong partner with extensive experience in the fish industry

More than 30 years in the fish industry mean that, in all modesty, we are well equipped to take care of your task.
When you contact Landia, you will speak with staff who have technical understanding and experience. A large part of the technical strength are engineers, which guarantees broad technical expertise and a quick understanding of your task.

This is how we develop the best solution together with you

keyboard_arrow_up