Aerators for wastewater

With Landia’s aerators, you can keep the wastewater fresh in your wastewater tanks. Landia’s aerators can be installed in most types of tanks. They can be supplied in a submersible version where the entire aerator is lowered into the tank or for mounting through the side of the tank - dry-installed. Both types of aerators can be supplied in stainless steel.

Let us find a solution together

AirJet ejector aerator for wastewater

Landia AirJet is an ejector aerator composed of a Landia chopper pump and an ejector system. Landia AirJet is a simple aeration system that can be easily installed in most tank types, often without emptying the tank first.

Landia AirJet is typically used for aeration of wastewater or sludge, for combined mixing and aeration and for the elimination of troublesome odours, as the wastewater is kept fresh. AirJet is also suitable as supplementary aeration at peak loads and in connection with cleaning or flushing of equalization tanks - also called retention basins.

Landia AirJet can suck air down to a water depth of seven to eight metres. There is no maintenance on the aerator, as only the pump itself needs to be serviced. Landia AirJet can be delivered made of stainless steel.

Propeller aerators for wastewater

Landia PODB-I is a compact self-priming propeller aerator. It works by the rapidly rotating propeller automatically sucking the air, and thus the oxygen, down through a hose and then being released into the wastewater as bubbles.

The most obvious applications for Landia PODB-I are in connection with aeration of wastewater or sludge. It can also be for combined mixing and aeration. The aerator is also used to remove odours from wastewater, and to keep the wastewater fresh, for additional aeration at peak loads and when cleaning equalization tanks.

If needed, we offer to supply Landia PODB-I made of stainless steel.

Case study about aerators

Our models

The sensible choice for your system

  • checkReliable equipment with a proven long lifetime of use gives you time to focus on other important things during the workday.
  • checkA safe investment – spare parts and service are always available directly from our US subsidiary located in North Carolina.
  • checkPersonal service guaranteed. We say what we do, and we do what we say.

Read more about what we stand for

Our solutions within wastewater

Case studies - wastewater

Wastewater

Long-lasting Chopper Pumps continue to go hell for leather

When Pittards, the leading leather goods producer, moved part of its manufacturing process from Leeds to Yeovil, they made very sure that its long-serving wastewater pumps went with them.

Read the case study

Wastewater

The Valley Center way - combining energy savings now – with total cost of ownership

At Valley Center Wastewater Treatment Plant, and at an increasing number of facilities across Kansas, the decision to buy the more expensive equipment at the outset is proving to be the most economic. Savings in long-term maintenance are important, but in the shorter term, energy savings are fundamental.

Read the case study

Wastewater

Huge savings made at leachate treatment plant

At a landfill’s leachate treatment centre, where floating biomass was reducing the plant’s throughput, the introduction by Viridian Systems of a new mixer has created annual savings on chemicals of around £85,000.

Read the case study

WastewaterBiogasGasMix

Mix to the max at Yorkshire Water’s major new Energy & Recycling Facility

At Yorkshire Water’s new £50M Huddersfield Energy and Recycling Facility (E&RF), the digester mixing system from Whitchurch-based Landia is ensuring that total gas production can reach its anticipated 22,192Nm³/d (normal cubic meter/day).

Read the case study

IndustrialWastewater

No more FOG, as major crust problem caused by Fats, Oils and Greases is defeated

Throughout Ohio there is a large a number of meat/food processing plants and municipal sites whose wastewater system is plagued by fats, oils, greases (FOG) and debris.

Read the case study

WastewaterBiogasGasMix

A Better Blend

An automated mixing system helps an Illinois treatment plant improve biogas production and increase volatile solids destruction.

Read the case study

IndustrialWastewater

New wastewater mixers reduce maintenance and improve health & safety

Following a highly successful upgrade to its wastewater process, Glatfelter, the leading global supplier of engineered materials, has made further investments in mixers made by Landia.

Read the case study

Wastewater

Stalwart Submersible Mixers help Montana WWTP make big energy savings

When the small team at Daffy Hills Lane selected their new mixers as part of plant upgrade in 2004, they chose very wisely indeed – and not just because those same mixers are still dutifully working away today.

Read the case study

WastewaterBiogasGasMix

Landia Digester Mixing System increases biogas by 20 percent

At the multi-award-winning Downers Grove Wastewater Treatment Center in Illinois, the Landia’s GasMix digester mixing system has increased biogas production by approximately 20 percent.

Read the case study

IndustrialWastewaterGasMix

Landia and Cambi help deliver big upswing in biogas production for the water industry

Just south of Aberdeen, improvements continue to be made at Scottish Water’s Sludge Treatment Centre (STC) in Nigg – but at a site still approaching its full potential, 0.9~1.0MW per tonne of Dry Solids is already being consistently produced.

Read the case study

A strong partner with extensive experience in wastewater

Landia supplied the first mixers for sewage treatment plants in the 1980s and today you will find Landia products at sewage treatment plants worldwide. The wastewater industry is growing year by year and we are keeping pace. When you contact Landia, you will speak with staff who know the industry, and who knowsand understand the wastewater industry.

This is how we develop the best solution with you

keyboard_arrow_up