Lift station chopper pumps for wastewater

Today, municipal sewage contains unreasonably large amounts of “flushable wipes”, household grease, and other troublesome materials, which can build up into thick scum layers in lift stations, and at times even large fatbergs, which cause problems for the sewage pumps and headaches for the collection systems operators. The Landia Gator-series offers a range of heavy-duty chopper pumps and jet aerators, which eliminate these troublesome build-ups and prevent pump failures and lift station clogging. 

Let us find a solution together

Easy adaptation to an existing installation

A Landia chopper pump can be adapted to the installation equipment of most other pump manufacturers, so it is both quick and simple to upgrade your pumping station with a Landia chopper pump. Regardless of pump performance and installation conditions, you get a tailor-made pump solution for the specific task. If it is not possible to replace your existing pump with a Landia pump, there is an alternative: the Landia EradiGator is a chopper pump that recycles the contents of the pump station, breaks down impurities and counteracts clogging of your existing pump. Installation is fast and simple as the pump is mounted on a support foot and just needs to be connected to power and lowered into the tank. We call it Drop-In Choppin’ and you can literally get a Landia Gator and simply drop it into your own lift station for immediate results.  Contact us to learn how.

Case study about lift station chopper pumps

Our models

The sensible choice for your system

  • checkReliable equipment with a proven long lifetime of use gives you time to focus on other important things during the workday.
  • checkA safe investment – spare parts and service are always available directly from our US subsidiary located in North Carolina.
  • checkPersonal service guaranteed. We say what we do, and we do what we say.

Read more about what we stand for

Our solutions within wastewater

Case studies - wastewater

Wastewater

New biogas production landmark for Scottish Water’s acclaimed sludge facility at Nigg

If we took a short trip forward in time to 2040, and then looked back at how some organisations in the water industry successfully achieved Carbon Net Zero, it’s likely you’ll see a large four-letter word: NIGG.

Read the case study

Wastewater

Daphne finds prime solution for primary problematical lift station

Suck it up, pressurize it and send it to the treatment plant. In theory, this should be a straightforward job for pumps at a lift station. However, as we all know, the curse of so-called ‘flushable’ products in our sewer systems is also proving that some so-called ‘non-clogging pumps’ are getting clogged.

Read the case study

Wastewater

Long-lasting Chopper Pumps continue to go hell for leather

When Pittards, the leading leather goods producer, moved part of its manufacturing process from Leeds to Yeovil, they made very sure that its long-serving wastewater pumps went with them.

Read the case study

Wastewater

The Valley Center way - combining energy savings now – with total cost of ownership

At Valley Center Wastewater Treatment Plant, and at an increasing number of facilities across Kansas, the decision to buy the more expensive equipment at the outset is proving to be the most economic. Savings in long-term maintenance are important, but in the shorter term, energy savings are fundamental.

Read the case study

Wastewater

Huge savings made at leachate treatment plant

At a landfill’s leachate treatment centre, where floating biomass was reducing the plant’s throughput, the introduction by Viridian Systems of a new mixer has created annual savings on chemicals of around £85,000.

Read the case study

WastewaterBiogasGasMix

Mix to the max at Yorkshire Water’s major new Energy & Recycling Facility

At Yorkshire Water’s new £50M Huddersfield Energy and Recycling Facility (E&RF), the digester mixing system from Whitchurch-based Landia is ensuring that total gas production can reach its anticipated 22,192Nm³/d (normal cubic meter/day).

Read the case study

IndustrialWastewater

No more FOG, as major crust problem caused by Fats, Oils and Greases is defeated

Throughout Ohio there is a large a number of meat/food processing plants and municipal sites whose wastewater system is plagued by fats, oils, greases (FOG) and debris.

Read the case study

WastewaterBiogasGasMix

A Better Blend

An automated mixing system helps an Illinois treatment plant improve biogas production and increase volatile solids destruction.

Read the case study

IndustrialWastewater

New wastewater mixers reduce maintenance and improve health & safety

Following a highly successful upgrade to its wastewater process, Glatfelter, the leading global supplier of engineered materials, has made further investments in mixers made by Landia.

Read the case study

Wastewater

Stalwart Submersible Mixers help Montana WWTP make big energy savings

When the small team at Daffy Hills Lane selected their new mixers as part of plant upgrade in 2004, they chose very wisely indeed – and not just because those same mixers are still dutifully working away today.

Read the case study

A strong partner with extensive experience in wastewater

Landia supplied the first mixers for sewage treatment plants in the 1980s and today you will find Landia products at sewage treatment plants worldwide. The wastewater industry is growing year by year and we are keeping pace. When you contact Landia, you will speak with staff who know the industry, and who knowsand understand the wastewater industry.

This is how we develop the best solution with you

keyboard_arrow_up